Matters needing attention in installation and use of plastic meter box or electric meter box
1. Please carefully check the meter box parts in the installation.
2. Installation location should be selected without severe vibration, the impact is not enough to damage the electrical components of the place.
3. The meter box should be installed vertically and the inclination angle should not exceed 5 °.
4. In the course of the use of maintenance and cleaning of the meter box scene.
5. The materials used in the meter box are not resistant to alkali, oxidizing acids and amines, ketones, soluble in hydrogenation and aromatic solvents, so should avoid contact with these chemicals.
6. Avoid sharp objects and hard objects to scratch the surface of the meter box during use.
7. Meter box installation should try to choose a cool dry place, to avoid direct sunlight for a long time to extend the meter box and the energy meter and electrical components of the service life.
Matters needing attention in installation and use of electric meter box
公布 : TAIXI日付 : 2017-05-03ページビュー : 360
続きを読む
- Can the electric meter box and the fire hydrant box be a neighbor?
- Effect of voltage protection circuit breaker
- How to distinguish the good or bad of an AC contactor
- What are the requirements for the wiring when the EPS emergency power supply is used?
- New technology for auto reset circuit breaker with electric energy meter
- Technological innovation and breakthrough of auto reset circuit breaker
- The quality comparison of miniature circuit breakers is carried out in Zhejiang province to promote the quality improvement of the industry
- Communications industry: optical communications maintain a high level of prosperity
- How should consumers choose small circuit breakers?
- Structural characteristics of load isolation switch
- How to ensure the quality of the electric meter box industry
- What is the difference between disconnectors and isolation switches?
- Isolation requirements for electrical isolation switch
- Working principle of DC circuit breaker
- Development of molded case circuit breakers